[Advantages]

[Standard System Features]

[Individual Standard Features]

WASH AND RINSE
The wash and rinse portions of the process consist of a immersion wash station and a 3-stage recycling rinse station.

• Ultrasonic
  all tank uses piezoelectric immersible transducer which is located on the tank bottom.
  
• R/O water system
  deionized water is used in all tank.
  
• Tray shuttle rotation
  For better cleaning effect, tray shuttles are rotated in the tank.
  
• Recirculation system
  a centrifugal pump, cartridge filters, pressure gages, flow control valves are consisted of recirculating system.
  
• Temperature control
  All tanks are equipped with heaters to be able to maintain the preset temperature of the each tank, independently.
• Liquid level control
  Automatically, water level is controlled by a solenoid valve from the DI water supply when level is low or high.
• Sub tank
  The sub tank is divided into two area as dirty zone and clean zone.
  

AIR BLOWING

• A blast of compressed & regulated air removes large water droplets.
• The direction of nozzle can be easily adjusted.
• For better blowoff, tray shuttle is rotated.
• The fine filter(0.01miron)was installed.

HOT AIR BLOWING

• The compressed air is heated up to 120 degrees.
• The direction of nozzle can be easily adjusted.
• For better blowoff, tray shuttle is rotated.
• The fine filter(0.01miron)was installed.
• Temperature control
• electric heaters maintain preset temperature of dryer chamber.

COOLING

• The filtered and compressed air cools down the temperature of the parts for good handling.
• The fine filter(0.01miron)was installed.

TRANSPORT SYSTEM

• Shuttles are moved from tank to tank on Multi-Handling System.
• It means that all the tanks are kept simultaneously occupied.
• Thus the required cycle time can be easily reached.
• Cantilever design, with friction surfaces below and behind tanks
• Acceleration/deceleration without oscillation and variable speed
• Simplified programming
• Crash protection
• Exact positioning for vertical and horizontal position

APPLICATION

• Aqueous cleaning is the best choice for fine precision application.
• Typical applications for SP series are as follows:
• Fuel injector components
• Brake parts
• Booster parts
• Precision metal components
• Optics
• Electromechanical components